painted stove covers

🔲 BOX STYLE MEASURING GUIDE

To ensure the best fit for your stove cover (noodle board), it's important to understand how our dimensions work:

• The listed measurements refer to the outside dimensions of the cover—this is the total space the board will take up on your stove or countertop.

• To determine the actual area that will be covered, subtract 1 inch (½ inch for each side) from the listed dimensions. This gives you the inside dimensions, which is the area to be covered.

📏 How to Measure for the Right Fit

• Match the inside dimensions of our cover to the outside dimensions of your stovetop.

• In other words: the area you want to cover must be equal to or smaller than the inside of the board.

• The outside of the cover is where it will physically sit—so you’ll need to ensure there’s enough room.

📌 Clearance Requirements

If you're selecting a full box-style cover:

• Your stove will need at least ½ inch of clearance at the front and back for the cover to rest securely.

• The sides of the board also require ½ inch of support—this can be on the stove or overlapping onto the countertop.

• The reason for this is that the material used is ½ inch thick, so it needs that amount of resting space on each edge.

⚠️ Special Cases

• If your stove has a raised vent or control panel at the back, we recommend our 3-sided partial board to allow clearance without interfering with the vent.

📸 Need More Help?
Please refer to the Measuring Guide included in each listing for step-by-step instructions and photo examples.